Carrier WeatherExpert Ultra High-Efficiency Rooftop Unit 48LC

Carrier WeatherExpert Ultra High-Efficiency Rooftop Unit 48LC, Carrier WeatherExpert Rooftop Units – Save Up to 20% on Energy Bills | Carrier

Category:

Our Services in Toronto & GTA, Ontario

Delivery
Installation
Warranty
Disposal

INSTALLED FROM:

$14,000

Carrier WeatherExpert Ultra High-Efficiency Rooftop Units – The Ultimate Solution for Commercial Buildings!

Introducing Carrier WeatherExpert Ultra High-Efficiency Single-Packaged Rooftop Units 48LC, Gas Heating / Electric Cooling Units with Puron® (R-410A) Refrigerant, 3 to 23 Nominal Tons

Looking for an energy-efficient solution for your commercial building? Look no further than the Carrier WeatherExpert rooftop units! These ultra-high-efficiency rooftop units are packed with features designed with our customers in mind. With multi-stage cooling compressor logic, pre-wiring, and pre-charging with environmentally sound Puron® refrigerant, these units offer energy savings and humidity control while providing maximum comfort.

Performance Features

The Carrier WeatherExpert rooftop units boast some of the highest Integrated Energy Efficiency Ratio (IEER) ratings available in the industry, exceeding ASHRAE 90.1 and Energy Star efficiency levels, as well as Consortium for Energy Efficiency (CEE) criteria. The 3 to 5 ton models offer two-stage cooling capacity control, while the 6 to 23 ton models offer three-stage cooling capacity control. With up to 17.5 Seasonal Energy Efficiency Ratio (SEER) and 20.8 IEER, these rooftop units will save you money on your energy bills while keeping your building comfortable year-round.

Maintenance Features

We understand that maintaining your rooftop unit can be a hassle, which is why we designed the Carrier WeatherExpert rooftop units with ease of maintenance in mind. The control terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement, while access panels feature easy grip handles and tool-less filter access doors. Innovative, easy-starting, no-strip screws are featured on unit access panels, with optional hinged access panels also available. All models have a belt-drive evaporator-fan motor and pulley combinations with VFD controller to match the capacity cooling stages for maximum efficiency and comfort control. Two-inch disposable return air filters are standard, with 3 to 5 ton models offering an optional ECM direct drive (multi-speed and torque) indoor fan motor system.

Installation Features

Installation is a breeze with Carrier WeatherExpert rooftop units! These units have the same footprint as installed Carrier 3-5 ton rooftops back to 1989, reducing installation costs and time. They are field convertible from vertical to horizontal airflow for slab mounting without any special kits (size 04-12 units), with provisions for thru-the-bottom power entry capability as standard. Single point electric, gas, and controls connections make installation even easier. Full perimeter base rails with built-in rigging adapters and fork truck slots make moving these units a breeze. Dedicated vertical and horizontal airflow models are available as a factory option on size 14 to 26 units.

Reliability Features

Carrier WeatherExpert rooftop units are designed with reliability in mind, featuring scroll compressors with internal line-break overload protection, a 24-volt control circuit protected with resettable circuit breakers, and permanently lubricated evaporator-fan motors. Totally enclosed condenser motors with permanently lubricated bearings, low pressure and high-pressure switch protection, and exclusive IGC anti-cycle protection for gas heat operation provide peace of mind. Standard limited warranties are included, with extended warranty packages available.

Factory-Installed Options

The Carrier WeatherExpert rooftop units come with several factory-installed options that can enhance their performance even further. These options include cabinets, thru-the-base electrical or gas-line connections, hinged access panels, foil-faced insulation, and various coil options. Customers can choose from Cu/Cu indoor and/or outdoor coils, pre-coated outdoor coils, and premium, E-coated outdoor coils. Humidity control options include the Humidi-MiZer adaptive dehumidification system, while condenser protection options include the condenser coil hail guard (louvered design). The Carrier WeatherExpert rooftop units also offer various control options, such as the ComfortLink DDC communicating controller (sizes 04-06) and the RTU OPEN multi-protocol controller. Smoke detectors for supply and/or return air, economizers & outdoor air dampers, economizer sensors & IAQ devices, gas heat, low ambient control, power options, and field-installed accessories are also available.

Make the Switch to Carrier WeatherExpert Rooftop Units Today!

Are you ready to make the switch to a more energy-efficient solution for your commercial building? Look no further than the Carrier WeatherExpert rooftop units! With their high IEER ratings, easy maintenance, and hassle-free installation, these units are the perfect choice for any building owner or manager looking to save money and improve comfort. Choose from our various factory-installed options to customize your unit to your specific needs, and enjoy the peace of mind that comes with our standard limited warranties and extended warranty packages.

Features

  • Exceeded Department of Energy Advanced RTU Challenge by 15%
  • Exceeds ASHRAE 90.1 and Energy Star efficiency levels, as well as Consortium for Energy Efficiency (CEE) criteria
  • 3 to 5 ton models have two-stage cooling capacity control and 6 to 23 ton models have three-stage cooling capacity control
  • Up to 17.5 SEER and 20.8 IEER
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • 3 to 23 ton models have standard cooling operation up to 125 °F (52°C), and down to 10°F (-12°C) (3-5 ton models), or down to 40°F (4°C) (6-23 ton models). 3 to 5 ton models have cooling operation down to 0°F (-18°C) with ComfortLink controls.
  • VAV models use a duct static pressure sensor to vary the units indoor fan motor variable frequency drive (VFD) while cooling capacity is controlled by the units supply air temperature sensor, to make sure the correct temperature in each zone.
  • Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
  • Access panels with easy grip handles and tool-less filter access door
  • Innovative, easy starting, no-strip screw feature on unit access panels
  • Optional hinged access panels also available
  • Two-inch disposable return air filters
  • All models have a belt drive evaporator-fan motor and pulley combinations with VFD controller to match the capacity cooling stages for maximum efficiency and comfort control
  • 3 to 5 ton models have an optional ECM direct drive (multi-speed and torque) indoor fan motor system
  • Same footprint as installed Carrier 3-5 ton rooftops back to 1989, reducing installation costs and time
  • Field convertible from vertical to horizontal airflow for slab mounting without any special kits (size 04-12 units)
  • Provisions for thru-the-bottom power entry capability as standard
  • Single point electric, gas, and controls connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Dedicated vertical and horizontal airflow models available (factory option on size 14 to 26 units)
  • Scroll compressors with internal line-break overload protection
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Totally enclosed condenser motors with permanently lubricated bearings
  • Low pressure and high-pressure switch protection
  • Exclusive IGC anti-cycle protection for gas heat operation
  • Solid-state electronic direct spark ignition system and flame roll-out safety protector

Standard Limited Warranty

  • 10 years parts only heat exchanger – aluminized
  • 15 years parts only heat exchanger – stainless steel
  • 5 years parts only compressor
  • 3 years parts only on ComfortLink controls
  • One year parts only on all other parts
  • Extended warranty packages available

For California Residents – 3-5 Ton G/E Models Only

For installation in SCAQMD only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.

Factory-Installed Options

  • Cabinet
    • Thru-the-base electrical or gas-line connections
    • Hinged access panels
    • Foil-faced insulation
  • Coil Options
    • Cu/Cu indoor and/or outdoor coils
    • Pre-coated outdoor coils
    • Premium, E-coated outdoor coils
  • Humidity Control
    • Humidi-MiZer Adaptive dehumidification system
  • Condenser Protection
    • Condenser coil hail guard (louvered design)
  • Controls
    • ComfortLink DDC communicating controller (sizes 04-06)
    • RTU OPEN multi-protocol controller
    • Smoke detector (supply and/or return air)
  • Economizers & Outdoor Air Dampers
    • EconoMi$er X (for electro-mechanical controlled RTUs with CA Title 24 FDD)
    • EconoMi$er2 (for DDC controlled RTUs)
    • Ultra-low leak economizer dampers
    • Motorized 2 position outdoor-air damper
    • Manual outdoor-air damper(sizes 14-26)
    • Barometric relief
    • Power exhaust (sizes 14-26)
  • Economizer Sensors & IAQ Devices
    • Single dry bulb temperature sensors
    • Single enthalpy sensors
    • CO2 sensor (wall, duct, or unit mounted)
  • Gas Heat
    • Stainless steel heat exchanger
  • Indoor Motor & Drive
    • Multiple motor and drive packages
  • Low Ambient Control
    • ComfortLink provides cooling operation down to 0°F (-18°C)(3 to 5 ton only)
  • Power Options
    • Convenience outlet (powered)
    • Convenience outlet (unpowered)
    • Non-fused disconnect
    • HACR Circuit Breaker

Field-Installed Accessories

  • Cabinet
    • Thru-the-base electrical or gas-line connections
  • Condenser Protection
    • Condenser coil hail guard (louvered design)
  • Controls
    • Thermostats, temperature sensors, and subbases
    • Smoke detector (supply and/or return air) (sizes 14-26)
    • Time Guard II compressor delay control circuit
    • Filter status switch
    • Fan status switch
  • Economizers & Outdoor Air Dampers
    • EconoMi$er X (for electro-mechanical controlled RTUs with CA Title 24 FDD)
    • EconoMi$er2 (for DDC controlled RTUs)
    • Ultra-low leak economizer dampers
    • Motorized 2 position outdoor-air damper
    • Manual outdoor-air damper
    • Barometric relief
    • Power exhaust
  • Economizer Sensors & IAQ Devices
    • Single dry bulb temperature sensors
    • Differential dry bulb temperature sensors
    • Single enthalpy sensors
    • Differential enthalpy sensors
    • CO2 sensor (wall, duct, or unit mounted)
  • Gas Heat
    • Liquid propane (LP) conversion kit
    • High altitude conversion kit
    • Flue discharge deflector
  • Low Ambient Control
    • Winter start kit
  • Roof Curbs
    • Roof curb 14″ (356mm)
    • Roof curb 24″ (610mm)
Manufacture ( Brand )

Carrier

Air Conditioner Output (TON)

3 – 23 Ton

Get a Free Estimate

At Commodore Group, we are dedicated to providing comprehensive electrical and mechanical contracting services for residential, commercial, Condominium and industrial properties throughout the Greater Toronto Area in Ontario. Our experienced team is committed to offering the best prices for installation, service, and repair of various equipment such as furnace, air conditioner, boiler, heat pump, water heater, backup generator, EV charger, rooftop unit, fan coil unit, walk in cooler, and walk in freezer. We take pride in our expertise and excellent customer service, making us your one-stop solution for all your electrical and mechanical needs.